A damp smell or wet floor after a leak may point to water below a suspended floor. Do not crawl into a flooded or confined subfloor; access and drying should be assessed with suitable safety controls.
Avoid unsafe entry
Subfloor voids can contain standing water, electrical services, contaminated material or restricted airflow. Keep out of confined or flooded spaces and use qualified help for inspection.
If water may have reached wiring, keep clear and obtain electrical advice. Stop the leak only if the isolation point can be reached safely.
Describe the clues
Note the rooms affected, water source, time wet and any odour or floor changes. Photograph accessible vents and water marks without entering the void.
A dry-looking floor may sit above wet insulation, joists or soil. Mention if the event followed a storm, pipe leak or bathroom overflow.
Measure and plan the drying
An assessment can examine access, affected materials and moisture levels before setting a drying approach. The plan may need to address airflow and concealed wet areas, not just the room above.
For subfloor assessment in Sydney and the Central Coast, visit subfloor drying services or make a ServiceM8 request.
Frequently asked questions
Can I leave the subfloor vents open?
Ventilation may help in some conditions, but it cannot remove standing water or confirm that concealed materials are dry.
Does a damp floor mean the subfloor is flooded?
Not necessarily. Several sources can cause damp floors; inspection helps establish where water has travelled.
General information only. The correct response depends on the water source, materials and site safety. This is not electrical, plumbing, medical or insurance advice. Call 000 for immediate danger.
Related: subfloor drying · view all service areas.
